Welcome to Teckwiki.com! This post provides everything you need about the P75-348V6.0 firmware for the universal TV motherboard. You’ll find firmware files, detailed specs, and a clear installation guide. This Android smart board powers TVs with full HD resolution and strong network features. Let’s get started.
What is the P75-348V6.0 Motherboard?
The P75-348V6.0 is a universal driver board built for 32″ to 49″ screens. It delivers a full HD resolution of 1920×1080 and runs on Android 6.0. Known for its fast WiFi and multiple ports, it’s a solid choice for smart TVs. This combo board includes an ATV system, backlight driver, and power supply module, all in one.
Key Features and Specifications
Here’s what makes the P75-348V6.0 stand out:
- Resolution: 1920×1080 (Full HD)
- Operating System: Android 6.0 (non-upgradeable)
- Ports:
- 3 HDMI inputs
- 2 USB ports
- RCA input
- VGA for PC connection
- Headphone jack
- LAN/RJ45 Ethernet
- SPDIF output
- CPU: 4 Core A7, 1.2 GHz
- GPU: Mali400*2, 500 MHz
- RAM: 1 GB
- ROM: 8 GB eMMC
- Audio Output: 2x8W
- Power Input: 110-240V AC
- TV Signal Support:
- Analog: PAL/NTSC/SECAM
- Digital: DVB-T/T2/C/S2, ATSC, ISDB, DMBT
This board works with single or dual LVDS interfaces and supports panels with 12V power. It’s a practical solution for many TV setups.
Firmware Download Links
Need the firmware? Download the EMMC backup files here:
These files were read from working TVs. Make sure to verify your board before installing.
Note: The Teckwiki Team is not liable for damage caused by these files. Check your board and proceed carefully.
How to Install P75-348V6.0 Firmware
Follow these steps to install the firmware:
- Download both .part1 and .part2 files from the links above.
- Extract them using a tool like WinRAR or 7-Zip.
- Copy the extracted files to a USB drive.
- Plug the USB into your TV’s USB port.
- Follow the TV’s on-screen prompts to update the firmware.
If you’re new to this, read our first. Be cautious—wrong steps can cause problems.
Visit a trusted tech forum like ifixit.com for more tips.
Important Notes on Android and Firmware
- Android Version: The board runs Android 6.0. This version is final and cannot be updated.
- When to Update: Only install firmware if the default software fails due to bugs. If your TV works fine, skip it.
- Risks: Improper installation can leave the board stuck on standby. Double-check everything first.
EMMC Backup and Troubleshooting
The P75-348V6.0 has an 8 GB eMMC chip. Here’s what you need to know:
- Reading Backup: You can use a USB drive to read the EMMC backup.
- Writing Backup: To write a backup, JTAG the board and use a programming tool. This is tricky—only do it if the board is on standby due to software issues, not hardware faults.
- Check First: If the standby light is red, trace the fault. Hardware problems mean firmware won’t help.
Replacing the P75-348V6.0 Board
If your board is dead, consider these steps:
- Same Model: Replace it with another P75-348V6.0 if possible.
- Alternative: If unavailable, find a board with matching specs, like 1920×1080 resolution and Android 6.0 or newer.
- Backlight Fix: If only the backlight module fails, replace just that part—no need for a full board swap.
Frequently Asked Questions
Here are answers to common questions:
Can I Update Android on P75-348V6.0?
No, Android 6.0 is the final version for this board.
How Do I Install the Firmware?
Download the files, extract them, copy to a USB, and follow your TV’s instructions.
What If My Board Isn’t Working?
Test for hardware faults first. If it’s a software issue, try the firmware. If it’s hardware, replace the board.
What Screen Sizes Does It Support?
It works with 32″ to 49″ screens, up to 65″ with adjustments.
Conclusion
The P75-348V6.0 is a reliable universal TV motherboard with strong features like full HD resolution and fast WiFi. Use the firmware files and guide in this post to keep it running smoothly. Handle updates with care to avoid issues. For more tech help, stick with Teckwiki.com.
